Classy Headphone Controller Rack

Written on 03/19/2021

Marc Spagnuolo

An elegant and simple rack that holes a game controller and a set of headphones.

When I looked around at headphone and controller racks to go with my RGB Gaming Desk, the products I found were either 3D printed plastic or large stands that took up valuable desk space. So I decided to design a classy-looking wall-mounted rack that would happily hold and display my controller and headphones. I started by making sure the utility was there and then shaped the parts with curves I found appealing. It’s a great addition to my PC gaming setup. If you don’t have the time or tools to build your own using the free plans below, you can buy one from us for a limited time. These actually take a lot more work than anticipated so I don’t know how long we’ll continue making them so get ’em while you can!

[product id=”54046″]

Download the Plans

Right-Click and “Save As” to download files. Left-click will only open the file in your browser.

Bob St. Germain

on 03/19/2021 at 12:48 PM

CNC DXF File does not download as a dxf; it is a text(?) file. How do I get the dxf downloaded as a dxf file?

on 03/19/2021 at 01:15 PM

Really not sure. I’m on a mac and it downloads as a DXF file for me. Maybe try a different browser and see if that changes the behavior?

Rich S

on 03/19/2021 at 01:31 PM

Right click, choose “save link as…” and pick the location you want to save the file.

Tim Malega

on 03/19/2021 at 02:00 PM

Tried to download the cnc files on both microsoft edge and firefox and still cant download them. It pulls up a seperate window with the code in it.

Michael Vo

on 03/19/2021 at 02:24 PM

I think you can right click on the link and click on Save Link As.. to save it as a DXF.

Dave Soetanto

on 03/19/2021 at 02:45 PM

A DXF file is a txt file. To download in Chrome right-click and Save Link As.

Travis O

on 03/19/2021 at 04:48 PM

You tried to left-click on it, and the browser doesn’t know how to properly read a .dxf (obviously). Right click the link, then there should be a ‘save link as’ option. Hope this helps! :)Thanks Marc, for providing the vectors!

Jesse Michalkiewicz

on 03/19/2021 at 05:15 PM

I could not get this to download on my phone with safari so i went to my mac and tried firefox i was all text. So I went to safari and right clicked and downloaded linked file and tried to open it but it was still text. So I looked at the saved file name and for some reason it is saved as .dxf.txt so I removed the .txt and left the .dxf and now i can open it. Hope that helps. I’m not sure how it will work for pc as i could not get it to download with firefox on my mac.

Kenneth Baugh

on 03/19/2021 at 08:26 PM

a dxf must be imported into your gcode editor. I imported it fine into fusion360.

DONALD SHARP

on 03/19/2021 at 08:33 PM

Thank you very much for your generosity and kindness. Awesome design, I am a father with seven sons this so great for organizing their controllers.

Stephen Moore

on 10/02/2022 at 09:47 PM

Great idea and design, if only my kids will use it…

Classy Headphone Controller Rack

Download the Plans

Comments