Comments
Peter Gonda
on 02/16/2024 at 08:40 pm
Hey Marc!I was looking at making something similar and using your plan as a starting point. I noticed that you have 15 BF of 5/4 walnut but I only see 4/4 in the cut list above. I have never built any web assembly cabinet like this, are the web frames supposed to use the 5/4 thickness material for more strength? The videos are great!ThanksPeter
Marc Spagnuolo
on 02/17/2024 at 11:22 am
The cut list has both 4/4 and 5/4 in it. The 5/4 is for the top. Web frames are 4/4.
All About That Grain! | Legs and Rails | Sideboard Series Pt 1
Written on 11/22/2023
Marc Spagnuolo
Selecting the stock and milling the legs and rails for the side assemblies.
Looking for the Summary version of this build? Click here!
Stuff I Used:
- Bumblechutes Finish – Save 10% with code TWW10
- Amana Countersink Bit
- Backside Sandpaper
- Milwaukee Die Grinder
- Carbide Burr (Ball)
- Large Core Box Bit
- Mouse Card Scraper
- Leigh Dovetail Jig
- My Vacuum Press Setup
- Taper Maker Hardware Kit
- RevMark White Marker
- White Pencil
- Festool Domino
- Festool OF1400 Router
- 1/4″ Upspiral Bit
- Titebond Extend
- Dovetail Bit
- Milwaukee Die Grinder
- Cove Bit
- Preppin Weapon Sanding Block
- Milwaukee Compact Router